Ip Address - H3C MSR 20-20 Command Reference Manual

784 C 59: IP A
HAPTER DDRESSING

ip address

Syntax
View
Parameter
Description
C C
ONFIGURATION OMMANDS
<Sysname> display ip interface brief ethernet 1/0
*down: administratively down
(s): spoofing
Interface
Ethernet1/0 up
Table 155 Description on fields of the display ip interface brief command
Field Description
*down The interface is administratively shut down with the shutdown
command.
(s) Spoofing attribute of the interface. It indicates that an interface whose
network layer protocol is displayed up may have no link present or the
link is set up only on demand.
Interface Interface name
Physical Physical state of interface
Protocol Network layer protocol state of interface
IP Address IP address of interface (if no IP address is configured, "unassigned" is
displayed.)
ip address ip-address { mask | mask-length } [ sub ]
undo ip address [ ip-address { mask | mask-length } [ sub ] ]
Interface view
ip-address: IP address of interface, in dotted decimal notation.
mask: Subnet mask in dotted decimal notation.
mask-length: Subnet mask length, the number of consecutive ones in the mask.
sub: Secondary IP address for the interface.
Use the ip address command to assign an IP address and mask to the interface.
Use the
undo ip address
Use the undo ip address
the primary IP address.
Use the
undo ip address
remove a secondary IP address.
By default, no IP address is assigned to any interface.
When assigning IP addresses to an interface, consider the following:
You can assign only one primary IP address to an interface.
■
Physical Protocol
up
command to remove all IP addresses.
ip-address { mask | mask-length } command to remove
ip-address { mask | mask-length } sub command to
IP Address
192.168.0.1