Ipv6 Nd Distributed-Gateway Dynamic-Entry Synchronize; Mac-Address - H3C CR16000-F Command Reference Manual

ipv6 nd distributed-gateway dynamic-entry synchronize

Use ipv6 nd distributed-gateway dynamic-entry synchronize to enable dynamic
ND entry synchronization for distributed VXLAN IP gateways.
Use undo ipv6 nd distributed-gateway dynamic-entry synchronize to disable
dynamic ND entry synchronization for distributed VXLAN IP gateways.
Syntax
ipv6 nd distributed-gateway dynamic-entry synchronize
undo ipv6 nd distributed-gateway dynamic-entry synchronize
Default
Dynamic ND entry synchronization is disabled for distributed VXLAN IP gateways.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When local ND proxy is enabled on distributed VXLAN IP gateways, each gateway learns ND
information independently. A gateway does not forward ND packets destined for its local VSI
interfaces to other gateways. For distributed VXLAN IP gateways to have the same ND entries, you
must enable dynamic ND entry synchronization.
A controller or the EVPN feature can also synchronize ND entries among distributed VXLAN IP
gateways. When you use a controller or the EVPN feature, do not enable dynamic ND entry
synchronization.
Examples
# Enable dynamic ND entry synchronization for distributed VXLAN IP gateways.
<Sysname> system-view
[Sysname] ipv6 nd distributed-gateway dynamic-entry synchronize
Related commands
distributed-gateway local
local-proxy-nd enable (Layer 3—IP Services Command Reference)

mac-address

Use mac-address to assign a MAC address to a VSI interface.
Use undo mac-address to restore the default.
Syntax
mac-address mac-address
undo mac-address
Default
The MAC address of VSI interfaces equals the bridge MAC address plus 2. For example, if the
bridge MAC address is 00fc-5ba5-d800, the MAC address of VSI interfaces is 00fc-5ba5-d802.
44