Reset Udp Statistics; Tcp Anti-Naptha Enable - H3C MSR 20-20 Command Reference Manual

800 C 60: IP P
HAPTER ERFORMANCE
Parameter
Description
Related command:
Example

reset udp statistics

Syntax
View
Parameter
Description
Example

tcp anti-naptha enable

Syntax
View
Parameter
Description
C C
ONFIGURATION
None
Use the reset tcp statistics
display tcp statistics.
# Display statistics of TCP traffic.
<Sysname> reset tcp statistics
reset udp statistics
User view
None
Use the
reset udp statistics
# Display statistics of UDP traffic.
<Sysname> reset udp statistics
tcp anti-naptha enable
undo tcp anti-naptha enable
System view
None
Use the tcp anti-naptha enable
Naptha attack.
Use the
undo tcp anti-naptha enable
against Naptha attack.
By default, the protection against Naptha attack is disabled.
Note that the configurations of the tcp state and tcp timer check-state
command will be deleted after the protection against Naptha attack is disabled.
n
The support for this command varies with devices.
OMMANDS
command to clear statistics of TCP traffic.
command to clear statistics of UDP traffic.
command to enable the protection against
command to disable the protection