Udp Helper Configuration Commands; Display Udp-Helper Server; Reset Udp-Helper Packet - H3C MSR 20-20 Command Reference Manual

62

display udp-helper server

Syntax
View
Parameter
Description
Example

reset udp-helper packet

Syntax
View
Parameter
Description
Related command:
Example
UDP H
ELPER
C
OMMANDS
display udp-helper server [ interface interface-type interface-number ]
Any view
interface interface-type interface-number: Displays information of forwarded
UDP packets on the specified interface.
Use the
display udp-helper server
forwarded UDP packets on the specified interface or all interfaces.
If interface-type interface-number is not specified, this command displays the
information of forwarded UDP packets on all interfaces.
# Display the information of forwarded UDP packets on the interface Ethernet1/0.
<Sysname> display udp-helper server interface ethernet 1/0
Interface name
Ethernet1/0
The information above shows that the IP address of the destination server
corresponding to the interface Ethernet 1/0 is 192.1.1.2, and that no packets are
forwarded to the destination server.
reset udp-helper packet
User view
None
Use the
reset udp-helper packet
packets forwarded.
display udp-helper server.
# Clear the statistics of the forwarded UDP packets.
C
ONFIGURATION
command to display the information of
Server address
192.1.1.2
command to clear the statistics of UDP
Packets sent
0