Display Ip Policy-Based-Route Statistics - H3C MSR 20-20 Command Reference Manual

812 C 61: IP U
HAPTER NICAST

display ip policy-based-route statistics

Syntax
View
Parameters
Description
Examples
P R C
OLICY OUTING ONFIGURATION
Table 166 Description on fields of the display ip policy-based-route setup command
Field
policy-based-route pr01
permit node 1
if-match acl 3101
apply output-interface Ethernet1/0
display ip policy-based-route statistics { interface interface-type interface-number |
local }
Any view
interface interface-type interface-number: Displays statistics of interface policy
routing enabled on the interface specified by the argument interface-type
interface-number.
local: Displays statistics of enabled system policy routing.
Use the
display ip policy-based-route statistics
routing statistics.
# Display statistics of interface policy routing enabled on interface Ethernet1/0.
<Sysname> display ip policy-based-route statistic interface ethernet1/0
Interface Ethernet1/0 policy based routing statistics information:
policy-based-route: aaa
permit node 5
apply output-interface ethernet 1/0
Denied: 0,
Forwarded: 0
Total denied: 0, forwarded: 0
Table 167 Description on fields of display ip policy-based-route statistic command
Field
Interface Ethernet1/0 policy based routing
statistics information
policy-based-route: aaa
permit node 5
apply output-interface ethernet 1/0
Denied: 0, Forwarded: 0
Total denied: 0, forwarded: 0
C
OMMANDS
Description
Statistics of policy routing enabled on interface
Ethernet1/0.
The policy name is aaa.
The match mode of node 5 is permit.
The outgoing interface of matched packets is
Ethernet1/0.
Unsuccessfully/successfully forwarded packets
that match node 5
Unsuccessfully/successfully forwarded packets
that match all nodes of policy aaa
Description
The referenced policy name is pr01.
The match mode is permit and the
policy consists of only node 1.
Packets satisfying ACL 3101 are
matched.
The outgoing interface of matched
packets is Ethernet1/0.
command to display policy