Voice Vlan Enable; Voice Vlan Mac-Address - H3C MSR Series Command Reference Manual

received on the port until the aging time expires, the system automatically removes the port from the
voice VLAN. This aging time applies only to the ports in automatic voice VLAN assignment mode.
Examples
# Configure the voice VLAN aging time as 100 minutes.
<Sysname> system-view
[Sysname] voice vlan aging 100
Related commands
display voice vlan state

voice vlan enable

Use voice vlan enable to enable the voice VLAN feature and to configure a VLAN as the voice
VLAN for the Ethernet port.
Use undo voice vlan enable to disable the voice VLAN feature on an Ethernet port.
Syntax
voice vlan vlan-id enable
undo voice vlan [ vlan-id ] enable
Default
The voice VLAN feature is disabled on ports.
Views
Ethernet interface view
Default command level
2: System level
Parameters
vlan-id: Specifies a VLAN ID in the range of 2 to 4096.
Usage guidelines
Enable the voice VLAN feature on a hybrid or trunk port operating in automatic voice VLAN
assignment mode, but not on an access port operating in automatic voice VLAN assignment mode.
Examples
# Enable the voice VLAN feature on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] voice vlan 2 enable

voice vlan mac-address

Use voice vlan mac-address to allow packets carrying the specified OUI address to pass through.
Use undo voice vlan mac-address to prohibit packets carrying the specified OUI address from
passing through.
Syntax
voice vlan mac-address mac-address mask oui-mask [ description text ]
undo voice vlan mac-address oui
43