Display Ip Interface Brief - H3C MSR 20-20 Command Reference Manual

display ip interface brief

Syntax
View
Parameter
Description
Related command:
Example
Table 154 Description on fields of the display ip interface command
Field
DHCP packet deal mode
display ip interface brief [ interface-type [ interface-number ] ]
Any view
interface-type: Interface type.
interface-number: Interface number.
Use the
display ip interface brief
a specified or all Layer 3 interfaces.
Without the interface type and interface number specified, information about all
layer 3 interfaces is displayed; with only the interface type specified, the
information about all layer 3 interfaces of the specified type is displayed; with both
the interface type and interface number specified, only the information about the
specified interface is displayed.
Note that:
If you have configured the time slots of a CE1/PRI or CT1/PRI interface as an ISDN
PRI group using the pri-set command, then executing the display ip interface
brief command only displays the time slot used by the control channel (D
channel), instead of the ones used by the user channels (B channels). For details
about CE1/PRI and CT1/PRI interfaces, refer to "Fundamental CE1/PRI Interface
Configuration Commands" on page 201 and "Fundamental CT1/PRI Interface
Configuration Commands" on page 213.
display ip interface.
n
E1/T1 interfaces are time slotted. Using the pri-set command can bind time slots of
an E1/T1 interface into an ISDN PRI group, with each time slot corresponding to a
serial interface. To make the displayed output simple and clear, only the time slot
of the control channel (D channel) is displayed regardless of whether the display
ip interface brief command has an interface included or not.
# Display brief information about Ethernet 1/0.
Description
DHCP packet processing mode. This field
appears on a DHCP-supporting device and
can be one of the following values:
global: The DHCP server with the global
■
address pool is enabled on the
interface.
relay: The DHCP relay agent is enabled
■
on the interface.
command to display brief information about
783