Import-Source; Msdp - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510

7.1.6 import-source

Syntax
import-source [ acl acl-number ]
undo import-source
View
MSDP view
Parameter
acl-number: Basic or advanced IP ACL number, ranging from 2000 to 3999. An ACL
controls SA message advertisement by filtering sources (with a basic ACL) and filtering
sources or groups (with an advanced ACL). If you do not specify this argument, no
multicast source is advertised.
Description
Use the import-source command to specify the (S, G) entries in this domain that need
to be advertised when an MSDP peer creates an SA message.
Use the undo import-source command to cancel the configuration.
By default, an SA message advertise all the (S, G) entries in the domain.
In addition, you can use the peer sa-policy import command or the peer sa-policy
export command to filter forwarded SA messages.
Example
# Configure the (S, G) entries in the multicast routing table to be advertised when an
MSDP peer creates an SA message.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] acl number 3101
[H3C-acl-adv-3101] rule permit ip source 10.10.0.0 0.0.255.255 destination
225.1.0.0 0.0.255.255
[H3C-acl-adv-3101] quit
[H3C] msdp
[H3C-msdp] import-source acl 3101

7.1.7 msdp

Syntax
msdp
undo msdp
Chapter 7 MSDP Configuration Commands
7-6