Ip Addressing Configuration Commands; Display Ip Interface - H3C MSR 20-20 Command Reference Manual

59

display ip interface

Syntax
View
Parameter
Description
Example
IP A
DDRESSING
C
OMMANDS
display ip interface [ interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display ip interface
or all Layer 3 interfaces.
# Display detailed information about IP for interface Ethernet 1/0.
<Sysname> display ip interface ethernet 1/0
Ethernet1/0 current state : DOWN
Line protocol current state : DOWN
Internet Address is 1.1.1.1/8 Primary
Broadcast address : 1.255.255.255
The Maximum Transmit Unit : 1500 bytes
ip fast-forwarding incoming packets state is Disable
ip fast-forwarding outgoing packets state is Disable
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts : 0
ARP packet input number:
Request packet:
Reply packet:
Unknown packet:
TTL invalid packet number:
ICMP packet input number:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
C
ONFIGURATION
command to display information about a specified
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0