On-Site Installation; Lifting The Robot; Lifting The Robot By One Person - ABB CRB 1100 Product Manual

3.3 On-site installation

3.3.1 Lifting the robot

3.3.1.1 Lifting the robot by one person

General
This section describes how to lift the robot and move it by one person.
Grasping location
Position
Stand on foot
By side
Invented
Product manual - CRB 1100
3HAC078007-001 Revision: J
Grasping location
xx2100000155
xx2100000156
xx2100000157
© Copyright 2021-2023 ABB. All rights reserved.
3 Installation and commissioning
3.3.1.1 Lifting the robot by one person
Note
When the robot stands on its foot, grasp
the robot with one hand holding the lower
arm and the other hand holding the swing.
When the robot lies by side, grasp the ro-
bot with one hand holding the lower arm
and the other hand supporting at the base.
It is recommended to hold the robot
between your arm and body.
When the robot is inverted, grasp the robot
with one hand supporting at the housing
and the other hand holding the base.
Continues on next page
53