Timer Hello; Timer Quiet - H3C MSR Series Manual

Usage guidelines
If the maximum TCP linking time expires, the TCP connection request is canceled and the transaction
fails.
The configuration takes effect only for TCP connections established after the command is executed..
In addition to the maximum TCP linking time, the command also specifies the timeout time for the router
to wait for the FEP to respond to the caller number negotiation packet from an AM POS terminal device.
Examples
# Configure the maximum TCP linking time for POS application template 1 as 10 seconds.
<Sysname> system-view
[Sysname] posa app 1 type tcp
[Sysname-posa-app1] tcp linking-time 10

timer hello

Use timer hello to set the interval for a POS application template to send handshaking packets.
Use undo timer hello to restore the default.
Syntax
timer hello interval
undo timer hello
Default
A POS application template sends handshaking packets every 1 minute.
Views
POS application template view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval at which the POS application template sends handshake packets, in the
range of 1 to 600 minutes.
Usage guidelines
After you enable the handshaking function for an application template and specify the interval, the router
sends handshaking packets to the FEP at the specified interval.
Examples
# Set the handshaking interval time for POS application template 1 to 10 minutes.
<Sysname> system-view
[Sysname] posa app 1 type tcp
[Sysname-posa-app1] timer quiet 10
Related commands
hello enable

timer quiet

24