Configuring The Refresh Rate For Ipv6 Netstream Version 9 Templates - H3C SR6600-X Configuration Manual

Figure 71 Recorded AS information varies by different keyword configurations
To configure the IPv6 NetStream data export format:
Step
1. Enter system view.
2. (Optional.) Configure the
IPv6 NetStream data export
format, and specify whether
to record AS and BGP next
hop information.
Configuring the refresh rate for IPv6 NetStream version 9
templates
Version 9 is template-based and supports user-defined formats. An IPv6 NetStream-enabled device must
periodically resend the updated template to NetStream servers. The server cannot associate the statistics
with their proper fields when the following conditions exist:
The version 9 template is changed on the IPv6 NetStream-enabled device.
•
The version 9 template is not updated on NetStream servers.
•
To avoid this situation, configure the refresh frequency (in packets), the refresh interval (in seconds), or
both for version 9 templates so that NetStream servers can refresh them.
Command
system-view
ipv6 netstream export version 9
[ origin-as | peer-as ]
[ bgp-nexthop ]
231
Remarks
N/A
By default:
•
The version 9 format is used to
export IPv6 NetStream
traditional data, IPv6
NetStream aggregation data,
and MPLS flow data with IPv6
fields.
•
The peer AS numbers are
recorded.
•
The BGP next hop is not
recorded.