Make sure the Bits per second field is set to 9600 kbps. An incorrect bits per second may also
2.
cause the configuration terminal to display garbled characters.
No response from the serial port
If the serial port gives no response, verify that the serial port settings are correct.
NOTE:
For more information about the serial port settings, see
Password loss
CAUTION:
Dealing with console login password loss and user privilege level password loss from BootWare
menus is disruptive.
How to deal with console login password loss and user privilege level password loss depends on the
state of password recovery capability (see
user access to the device configuration and SDRAM from BootWare menus.
•
If password recovery capability is enabled, a console user can access the device configuration
without authentication and configure new passwords.
•
If password recovery capability is disabled, a console user must restore the factory-default
configuration before configuring new passwords. Restoring the factory-default configuration
deletes the main and backup next-startup configuration files.
To enhance system security, disable password recovery capability.
Figure 65 Dealing with password loss
Examining the state of password recovery capability
Reboot the router.
1.
"Setting terminal
Figure
65). Password recovery capability controls console
62
parameters."