Ipv6 Netstream Export V9-Template Refresh-Rate Packet - H3C SR6600 Command Reference Manual

interface-type interface-number: Specifies a source interface by its type and number for NetStream data
export.
Usage guidelines
Different source interfaces can be configured in different aggregation views.
If no source interface is configured in NetStream aggregation view, the source interface configured in
system view is used.
H3C recommends that you connect the network management interface to the NSC and configure it as
the source interface.
Examples
# Configure the source interface for IPv6 NetStream data export as GigabitEthernet 2/0/0.
<Sysname> system-view
[Sysname] ipv6 netstream export source interface gigabitethernet 2/0/0
Related commands
ipv6 netstream aggregation

ipv6 netstream export v9-template refresh-rate packet

Use ipv6 netstream export v9-template refresh-rate packet to configure the refresh frequency for IPv6
NetStream version 9 templates so that the templates are sent after the specified number of packets are
sent.
Use undo ipv6 netstream export v9-template refresh-rate packet to restore the default.
Syntax
ipv6 netstream export v9-template refresh-rate packet packets
undo ipv6 netstream export v9-template refresh-rate packet
Default
Version 9 templates are sent every 20 packets.
Views
System view
Default command level
3: Manage level
Parameters
packets: Specifies the number of packets that are sent before version 9 templates are sent to the
NetStream server for an update. It is in the range of 1 to 600.
Usage guidelines
Version 9 is template-based and supports user-defined formats, so the NetStream device needs to send
the new template to the NetStream server for an update. If the version 9 format is changed on the
NetStream device and not updated on the NetStream server, the server is unable to associate the
received statistics with its proper fields. To avoid such a situation, configure the refresh frequency for
version 9 templates so that the NetStream server can refresh them on time.
The refresh frequency and interval can be both configured, and the template is resent when either of the
conditions is reached.
197