Statistics Max-Group; Statistics Interval - H3C SR6600 Command Reference Manual

statistics max-group

Use statistics max-group to configure the maximum number of statistics groups that can be saved.
Use undo statistics max-group to restore the default.
Syntax
statistics max-group number
undo statistics max-group
Default
A maximum of two statistics groups can be saved.
Views
DLSw operation view, DNS operation view, FTP operation view, HTTP operation view, ICMP echo
operation view, SNMP operation view, TCP operation view, UDP echo operation view, UDP jitter
operation view, voice operation view
Default command level
2: System level
Parameters
number: Specifies the maximum number of statistics groups that can be saved, in the range of 0 to 100.
To disable collecting statistics, set the value to 0.
Usage guidelines
When the number of statistics groups saved reaches the upper limit and a new statistics group is to be
saved, the earliest statistics group is deleted.
This command is not supported by DHCP operation.
Examples
# Configure the NQA to save up to 5 statistics groups for the ICMP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics max-group 5

statistics interval

Use statistics interval to configure the interval for collecting result statistics for an NQA operation.
Use undo statistics interval to restore the default.
Syntax
statistics interval interval
undo statistics interval
Default
The interval is 60 minutes.
60