Port Group Interface - H3C MSR 810 Command Reference Manual

port group interface

Use
port group interface
Use
undo port group interface
Syntax
port group interface interface-type interface-number
undo port group interface interface-name
Default
No physical interfaces are bound to an IRF port.
Views
IRF port view
Predefined user roles
network-admin
Parameters
interface-type interface-number
interface-name
format. No space is allowed between the
arguments.
Usage guidelines
Execute this command multiple times to bind multiple physical interfaces to an IRF port. You can
bind a maximum of two physical interfaces to an IRF port.
Make sure the IRF physical interfaces of an IRF port use the same binding mode. In IRF mode, you
cannot configure IRF physical interfaces of an IRF port to use different binding modes. In standalone
mode, you can configure the IRF physical interfaces of an IRF port to use different binding modes.
However, only one binding mode takes effect after the operating mode changes from standalone to
IRF. The binding mode of the first IRF physical interface in the configuration file has the highest
priority.
In IRF mode, use the
remove it from an IRF port. To bring up the physical interface after a binding or binding removal
operation, use the
shutdown
The system does not dynamically remove IRF port bindings when IRF links are lost, for example,
because an interface card is removed. To remove IRF port bindings, you must use the
group interface
If you use physical interfaces that are grouped in hardware for IRF connection, follow these
restrictions and guidelines:
•
If you use one physical interface in a group as an IRF physical interface, the remaining physical
interfaces in the group can only act as IRF physical interfaces. You cannot use them for any
other purposes. To use a physical interface in a group for any purpose other than IRF physical
interfaces, do not bind any of the interfaces in the group to an IRF port.
•
The physical interfaces in a group can be bound to different IRF ports.
•
You must shut down all physical interfaces in a group before you can assign or remove any of
the interfaces to or from an IRF port. To bring up the interfaces after the assignment or removal
is complete, execute the
to bind a physical interface to an IRF port.
: Specifies a physical interface in the
command to shut down a physical interface before you bind it to or
shutdown
undo shutdown
operations are not required.
command.
undo shutdown
to remove the binding of a physical interface to an IRF port.
: Specifies a physical interface by its type and number.
interface-typeinterface-number
interface-type
command. In standalone mode, the
command.
28
and interface-number
and
shutdown
undo port
undo