Mac-Address Static Vsi - H3C MSR 5600 Comware 7 Vxlan Command Reference

Examples
# Set the VXLAN statistics collection interval to 30 seconds.
<Sysname> system-view
[Sysname] l2vpn statistics interval 30

mac-address static vsi

Use mac-address static vsi to add a static remote-MAC address entry for a VXLAN VSI.
Use undo mac-address static vsi to remove static remote-MAC address entries for a VXLAN
VSI.
Syntax
mac-address
vsi-name
undo mac-address static [ mac-address ] [ interface tunnel tunnel-number ]
vsi vsi-name
Default
VXLAN VSIs do not have static remote-MAC address entries.
Views
System view
Predefined user roles
network-admin
Parameters
mac - address : Specifies a MAC address in H-H-H format. Do not specify a multicast MAC address,
all-zeros MAC address, or all-Fs MAC address. You can omit the consecutive zeros at the beginning
of each segment. For example, you can enter f-e2-1 for 000f-00e2-0001.
interface tunnel tunnel-number : Specifies a VXLAN tunnel interface by its tunnel interface
number. The value range for the tunnel-number argument is 0 to 10239. The tunnel interface
must already exist.
vsi vsi-name : Specifies a VSI name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
A remote MAC address is the MAC address of a VM in a remote site. Remote MAC entries include
manually added MAC entries, dynamically learned MAC entries, and MAC entries advertised
through a protocol, for example, BGP EVPN.
When you add a remote MAC address entry, make sure the specified VSI's VXLAN has been
assigned the specified VXLAN tunnel.
The undo mac-address static vsi vsi-name command removes all static MAC address
entries for a VSI.
Do not configure static remote-MAC entries for tunnels that are automatically established by using
EVPN.
•
EVPN re-establishes tunnels if the transport-facing interface goes down and then comes up. If
you have configured static remote-MAC entries, the entries are deleted when the tunnels are
re-established.
•
EVPN re-establishes tunnels if you perform configuration rollback. If the tunnel IDs change
during tunnel re-establishment, configuration rollback fails, and static remote-MAC entries on
the tunnels cannot be restored.
static mac-address interface tunnel tunnel-number vsi
12