(Optional) Installing An Air Filter - H3C SR8800-F Series Installation Manual

Figure 4 Installing mounting brackets (SR8805-F)
2
1
(1) Screws for fixing the mounting brackets to the chassis
(2) Left mounting bracket

(Optional) Installing an air filter

Air filters are optional components for the router. If you have ordered an air filter, install the air filter
before mounting the router in the rack.
To install the air filter:
1. Unpack the air filter and the metal rails.
2. Attach the metal rails to the left of the router. Align the mounting holes on the metal rails with the
mounting holes above and below the inlet air vent, as shown by callout 1 in
3. Fasten the mounting screws to fix the metal rails.
4. Insert the air filter along the metal rails to the end, as shown by callout 2 in
5. Fasten the captive screws on the air filter, as shown by callout 3 in
3
1
(3) Right mounting bracket
5
Figure 5.
Figure 5.
Figure 5.