Installing A Cf Card; Installing Optional Components; Installing An Air Filter - H3C SR6600-X Series Manual

If the LED is on after the HIM/MIM/MIC initialization completes, the HIM/MIM/MIC has been
installed correctly and is operating correctly. If the LED is off, the HIM/MIM/MIC has failed the
POST.
Figure2-12 Installing a HIM/MIM/MIC

Installing a CF card

1. Push the CF card eject button all the way into the slot, and make sure the button does not
project from the panel.
2. Insert the CF card into the slot following the direction shown in Figure2-13, and make sure it
does not project from the slot.
Figure2-13 Inserting the CF card into the slot

Installing optional components

Optional components (including the air filter and lightning protectors) are not provided with the router.
Purchase them if necessary.

Installing an air filter

Installing an air filter on an SR6604-X/SR6608-X
The methods for installing air filters on the SR6604-X and SR6608-X are the same. This section uses
an SR6608-X as an example.
To install an air filter:
1. Face the left side (side of the inlet vents) of the router.
1
18
2