Table of Contents
Advertisement
Figure 3 Installing the mounting brackets
1
(Optional) Installing an air filter
Air filters are optional components and include chassis air filters and cabinet air filters. The
applicable air filters vary by router model.
Air filter is an optional component for the router. If you have ordered an air filter, install it before
mounting the router in the rack.
•
CR16010-F—Use a chassis air filter, which is installed over the air inlet vents at the bottom front
of the chassis. Before installing an air filter, install the power cord management bracket for the
chassis.
•
CR16010H-F/CR16010H-FA/CR16018-F/CR16018-FA—Use a cabinet air filter, which is
attached to the interior side of the cabinet door.
•
Other models—Use a chassis air filter, which is installed at the left of the chassis.
Installing an air filter for a CR16010-F router
1.
Place the air filter over the inlet vents at the front panel bottom, and then align the captive
screws on the air filter with the screw holes in the chassis.
2.
Faster the captive screws.
2
2
1
5
Advertisement
Table of Contents
