Installing Optional Components; Installing An Air Filter - H3C SR6604 Installation Manual

3

Installing optional components

Optional components are not provided with the router. Purchase them as needed.

Installing an air filter

1. Position the upper slide rail horizontally near the top of the left side of the chassis, as shown in
Figure3-1. Align the screw holes on the slide rail with those on the chassis.
2. Fasten the fastening screws one by one.
3. Position the lower slide rail horizontally near the bottom of the left side of the chassis, as shown
in Figure3-2. Align the screw holes on the slide rail with those on the chassis.
4. Fasten the fastening screws one by one.
Figure3-1 Installing the air filter slide rails
5. Gently push the air filter along the slide rails until it is seated in position.
Figure3-2 Inserting the air filter
6. Fasten the captive screws.
30