Command Reference Guide
demand-hold-queue <number> timeout <value>
Use the demand-hold-queue timeout command to set the number and length of time interesting packets
will be held while a connection is being made. Use the no form of this command to restore the default
value.
Syntax Description
<number>
<value>
Default Values
By default, the hold queue is disabled.
Command History
Release 11.1
Usage Examples
The following example configures demand interface 1 to hold 50 packets in the queue for up to
120 seconds:
(config)#interface demand 1
(config-demand 1)#demand-hold-queue 50 timeout 120
60000CRG0-35E
Specifies the number of packets that may be stored in the hold queue.
Range is 0 to 100.
Specifies the number of seconds a packet may remain in the hold queue.
Range is 0 to 255 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2101