ADTRAN AOS Version R10.1.0 Command Reference Manual page 2107

Command Reference Guide
idle-timeout <value>
Use the idle-timeout command to set the amount of time the interface link/bundle will remain up in the
absence of interesting traffic. Interesting traffic and direction logic are set using the match-interesting
commands. Refer to match-interesting ip on page 2145
command to restore the default value.
Syntax Description
<value>
Default Values
By default, idle-timeout is set to 120 seconds.
Command History
Release 11.1
Usage Examples
The following example configures demand interface 1 to time out after 360 seconds:
(config)#interface demand 1
(config-demand 1)#idle-timeout 360
60000CRG0-35E
Specifies the number of seconds the interface will remain up in the absence
of interesting traffic. Range is 1 to 2147483 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
for more information. Use the no form of this
2107