ADTRAN AOS Version R10.1.0 Command Reference Manual page 2106

Command Reference Guide
hold-queue <value> out
Use the hold-queue out command to change the overall size of an interface's wide area network (WAN)
output queue. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
The default queue size for weighted fair queuing (WFQ) is 400. The default queue size for Point-to-Point
Protocol (PPP) first in, first out (FIFO) and Frame Relay round-robin is 200.
Command History
Release 5.1
Release 11.1
Usage Examples
The following example sets the overall output queue size to 700:
(config)#interface demand 1
(config-demand 1)#hold-queue 700 out
60000CRG0-35E
Specifies the total number of packets the output queue can contain before
packets are dropped. Range is 16 to 1000 packets.
Command was introduced.
Command was expanded to include the demand interface.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2106