Reset Acl Ipv6 Counter; Rule (Basic Ipv6 Acl View) - H3C S3100 Series Command Manual

ACL's step is 5
5 times matched
rule 0 comment This rule is used in GE 1/0/1

reset acl ipv6 counter

Syntax
reset acl ipv6 counter { acl6-number | all | name acl6-name }
View
User view
Default Level
2: System level
Parameters
acl6-number: IPv6 ACL number, which must be in the following ranges:
2000 to 2999 for basic IPv6 ACLs,
3000 to 3999 for advanced IPv6 ACLs.
all: Specifies all basic and advanced IPv6 ACLs.
name acl6-name: Specifies the name of the ACL, which is a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be named all to avoid confusion.
Description
Use the reset acl ipv6 counter command to clear statistics on a specified IPv6 ACL or all basic and
advanced IPv6 ACLs.
Examples
# Clear the statistics on IPv6 ACL 2001.
<Sysname> reset acl ipv6 counter 2001
# Clear the statistics on IPv6 ACL flow.
<Sysname> reset acl ipv6 counter name flow

rule (basic IPv6 ACL view)

Syntax
rule [ rule-id ] { deny | permit } [ counting | fragment | logging | source { ipv6-address prefix-length |
ipv6-address/prefix-length | any } | time-range time-range-name ] *
undo rule rule-id [ counting | fragment | logging | source | time-range ] *
Field
The rules in this ACL are numbered in steps of 5.
There have been five matches for the rule. Only IPv6
ACL matches performed by software are counted.
This field is not displayed when no match is found.
The description of ACL rule 0 is "This rule is used in
GE 1/0/1."
This field is not displayed when the rule has no
description or the slot slot-number combination is
provided in the command.
4-6
Description