Display Ip Routing-Table - H3C s3100 series Command Manual

Field
Physical
Protocol
Description

display ip routing-table

Syntax
display ip routing-table [ | { begin | exclude | include } regular-expression ]
View
Any view
Parameter
regular-expression: Regular expression, which specifies a match character string.
|: Uses the regular expression to match the output routing information.
begin: Displays the routing information from the route entry containing the specified character string.
include: Displays all routing information containing the specified character string.
exclude: Displays all routing information without the specified character string.
Description
Use the display ip routing-table command to display the summary information about the routing table.
This command displays the summary information about a routing table, with the items of a routing entry
contained in one line. The information displayed includes destination IP address/mask length, protocol,
preference, cost, next hop and outbound interface.
The display ip routing-table command only displays the routes currently in use, that is, the optimal
routes.
Example
# Display the summary information about the routing table.
<Sysname> display ip routing-table
Routing Table: public net
Destination/Mask
127.0.0.0/8
127.0.0.1/32
Table 1-4 Description on the fields of the display ip routing-table command
Field
Destination/Mask
Protocol
Pre
Cost
Physical state of the interface
Link layer protocol state of the interface
Description information for the interface
Protocol Pre Cost
DIRECT 0 0
DIRECT 0 0
Destination IP address/mask length
Routing protocol that discovers the route
Route preference
Route cost
Description
Nexthop
127.0.0.1
127.0.0.1
Description
1-5
Interface
InLoopBack0
InLoopBack0