Display Multicast Routing-Table - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
Matched 122 pkts(183000 bytes),
Wrong If 0 pkts
Forwarded
bytes)

2.1.4 display multicast routing-table

Syntax
display multicast routing-table [ group-address [ mask { mask | mask-length } ] |
source-address [ mask { mask | mask-length } ] | incoming-interface { interface-type
interface-number | register } ]*
View
Any view
Parameter
group-address: Multicast group address used to specify a multicast group and display
the routing table information corresponding to this group, in the range of 224.0.0.0 to
239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Specifies the incoming interface of the multicast routing entry.
register: Specifies the registration interface of PIM-SM.
Description
Use the display multicast routing-table command to display the information about
the IP multicast routing table.
This command is used to display the information about the multicast routing table, while
the display multicast forwarding-table command is used to display the information
about the multicast forwarding table.
Example
# Display the information about the routing entries corresponding to the multicast group
225.1.1.1.1 in the multicast routing table.
<H3C> display multicast routing-table
Multicast Routing Table
Total 3 entries
(4.4.4.4, 224.2.149.17)
Field
122 pkts(183000
2-5
Chapter 2 Common IP Multicast Configuration
Description
122 packets that are 183,000 bytes in all
match the (s,g) entry, and 0 wrong packet
matches the (s,g) entry.
122 packets that are 183,000 bytes in all are
forwarded.
Commands