Chapter 1 Ip Routing Table Commands; Ip Routing Table Commands; Display Ip Routing-Table - H3C S3100-52P Command Manual

Command Manual – Static Route
H3C S3100-52P Ethernet Switch

Chapter 1 IP Routing Table Commands

Note:
The term router in this chapter refers to a router in a generic sense or an Ethernet
switch running a routing protocol.

1.1 IP Routing Table Commands

1.1.1 display ip routing-table

Syntax
display ip routing-table [ | { begin | exclude | include } regular-expression ]
View
Any view
Parameters
regular-expression: Regular expression, a string of 1 to 256 case-sensitive characters
used for specifying routing entries.
|: Uses the regular expression to match the output routing information.
begin: Displays the routing information from the route entry containing the specified
character string.
include: Displays all routing information containing the specified character string.
exclude: Displays all routing information without the specified character string.
Note:
For details about regular expressions, refer to Configuration File Management
Operation of this manual.
Description
Use the display ip routing-table command to display the routing table summary.
1-1
Chapter 1 IP Routing Table
Commands