Display Interface Mp-Group - H3C MSR810 Command Reference Manual

# Set the description for MP-group 2/0/0 to mpgroup-interface.
<Sysname> system-view
[Sysname] interface mp-group 2/0/0
[Sysname-MP-group2/0/0] description mpgroup-interface

display interface mp-group

Use display interface mp-group to display information about a specified MP-group interface or all
MP-group interfaces.
Syntax
display interface [ mp-group [ interface-number ] ] [ brief [ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies an existing MP-group interface by its number in the range of 0 to 1023.
(Centralized devices in standalone mode.)
interface-number: Specifies an existing MP-group interface by its number in the format of X/Y/Z. X
represents the slot number of the physical interface, in the range of 0 to 2. The value of Y is fixed at
0. Z represents the number of the MP-group interface, in the range of 0 to 1023. (Distributed devices
in standalone mode.)
interface-number: Specifies an existing MP-group interface by its number in the format of X/Y/Z. X
represents the member ID of the IRF member device to which the physical interface belongs, in the
range of 1 to 2. The value of Y is fixed at 0. Z represents the number of the MP-group interface, in the
range of 0 to 1023. (Centralized devices in IRF mode.)
interface-number: Specifies an existing MP-group interface by its number in the format of R/X/Y/Z. R
represents the member ID of the IRF member device to which the physical interface belongs, in the
range of 1 to 2. X represents the slot number of the physical interface, in the range of 0 to 2. The
value of Y is fixed at 0. Z represents the number of the MP-group interface, in the range of 0 to 1023.
(Distributed devices in IRF mode.)
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays complete interface description. If you do not specify this keyword, the
command displays only the first 27 characters of the interface description if the description contains
more than 27 characters.
down: Displays information about interfaces in physically down state and the causes. If you do not
specify this keyword, the command displays information about all interfaces.
Usage guidelines
If you do not specify the mp-group keyword, the command displays information about all interfaces
on the device.
If you specify the mp-group keyword without the interface-number argument, the command displays
information about all existing MP-group interfaces.
Examples
# Display detailed information about MP-group 2/0/0.
36