Display L2Vpn Interface - H3C MSR 810 Command Reference Manual

network-operator
Parameters
name vsi-name
do not specify a VSI, this command displays entries for all VSIs.
slot slot-number
member device, this command displays entries on the master device. (In IRF mode.)
: Displays the number of ARP flood suppression entries that match the command.
count
Examples
# Display ARP flood suppression entries.
<Sysname> display arp suppression vsi
IP address
1.1.1.2
1.1.1.3
1.1.1.4
# Display the number of ARP flood suppression entries.
<Sysname> display arp suppression vsi count
Total entries: 3
Table 1 Command output
Field
Link ID
Aging
Related commands
arp suppression enable
reset arp suppression vsi

display l2vpn interface

Use
display l2vpn interface
mapped to VSIs.
Syntax
display l2vpn interface [ vsi vsi-name | interface-type interface-number ]
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi vsi-name
interface-type interface-number
: Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you
: Specifies an IRF member device by its member ID. If you do not specify a
MAC address Vsi Name
000f-e201-0101 vsi1
000f-e201-0202 vsi1
000f-e201-0203 vsi2
Description
Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.
Remaining lifetime (in minutes) of the ARP flood suppression entry. When
the timer expires, the entry is deleted.
to display L2VPN information for Layer 3 interfaces that are
: Specifies a VSI name, a case-sensitive string of 1 to 31 characters.
: Specifies an interface by its type and number.
4
Link ID Aging
0x70000 14
0x80000 18
0x90000 10