Display Ospfv3 Interface - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Number of interfaces in this area
SPF algorithm executed 1 times
Number of LSA
These LSAs' checksum Sum
Number of Unknown LSA

3.1.6 display ospfv3 interface

Syntax
display ospfv3 interface [ interface-type interface-number | statistic ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
statistic: Displays the interface statistics.
Description
Use the display ospfv3 interface command to display OSPFv3 interface information.
Examples
# Display OSPFv3 interface information of VLAN-interface 200.
<Sysname >display ospfv3 interface Vlan-interface 200
Vlan-interface200 is up, line protocol is up
Interface ID 11665607
IPv6 Prefixes
FE80::20F:E2FF:FE00:5 (Link-Local Address)
2001:1::2
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID: 1.1.1.1, Network Type: BROADCAST, Cost: 1
Transmit Delay is 1 sec, State: DR, Priority: 1
Designated Router (ID) 1.1.1.1
Interface Address: FE80::20F:E2FF:FE00:5
Backup Designated Router (ID): 2.2.2.2
Interface Address: FE80::20F:E2FF:FE00:2205
Timer interval configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5
Chapter 3 IPv6 OSPFv3 Configuration Commands
Field
3-6
Description
Number of interfaces attached to this
area
SPF algorithm is executed 1 time
Number of LSAs
Sum of all LSAs' checksum
Number of unknown LSAs