Ipv6 Maximum Load-Balancing - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – IPv6 Routing

H3C S7500E Series Ethernet Switches

acl6-number: Number of a basic or advanced ACL6 used to filter routes when they are

leaking from Level-2 to Level-1, ranging from 2000 to 3999.

ipv6-prefix-name: Name of an IPv6 prefix list used to filter routes when they are leaking

from Level-2 to Level-1, a string of 1 to 19 characters.

route-policy-name: Name of a routing policy used to filter routes when they are leaking

from Level-2 to Level-1, a string of 1 to 19 characters.

tag: Specifies a administrative tag number for the leaked routes, in the range of 1 to

Use the ipv6 import-route isisv6 level-2 into level-1 to enable IPv6 IS-IS route

leaking from Level-2 to Level-1.

Use the undo ipv6 import-route isisv6 level-2 into level-1 command to disable the

The leaking is disabled by default.

The route leaking feature enables a Level-1-2 router to advertise routes destined to the

Level-2 area and other Level-1 areas to the Level-1 and Level-1-2 routers in the local

# Enable IPv6 IS-IS route leaking from Level-2 to Level-1.

<Sysname> system-view

[Sysname] isis 1

[Sysname-isis-1] ipv6 import-route isisv6 level-2 into level-1

4.1.8 ipv6 maximum load-balancing

ipv6 maximum load-balancing number

undo ipv6 maximum load-balancing

number: Maximum number of equal-cost routes for load balancing. Its value is in the

range 1 to 4 and defaults to 4.

Chapter 4 IPv6 IS-IS Configuration Commands

Table of Contents