H3C MSR 20-20 Command Reference Manual page 764

764 C 56: DHCP D C
HAPTER EBUGGING OMMANDS
// The DHCP client starts address conflict detection using ARP.
*0.111421 Sysname DHCPC/7/DHCP_Client:
Vlan-interface2: Sending arp request for allocated address(22.0.0.2)
succeeded.
// ARP message sent
*0.111421 Sysname DHCPC/7/DHCP_Client:
Vlan-interface2: Move to BOUND state in 1 seconds if no arp reply is received.
// If no ARP reply is received, the state of the DHCP client will be changed to
BOUND state after 1 second.
*0.112375 Sysname DHCPC/7/DHCP_Client:
Vlan-interface2: Receive no arp reply for 22.0.0.2, begin to use the address.
// Since no ARP reply is received, the state of the DHCP client is changed to
BOUND, and the IP address can be used.