display mfr
Syntax
View
Parameter
Description
Example
Line protocol current state: UP (spoofing)
Description: Virtual-Template1 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet protocol processing : disabled
Link layer protocol is PPP
LCP initial
Physical is None
Output queue : (Urgent queue : Size/Length/Discards)
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards)
Last 300 seconds input:
Last 300 seconds output:
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
The "LCP initial" field of the display interface virtual-template command
indicates that LCP is initialized. Refer to Table 117 for the description on the other
fields.
display mfr [ interface interface-type interface-number | verbose ]
Any view
interface-type interface-number: Interface type and interface number.
verbose: Displays the detailed statistics.
Use the
command to display the configuration information and
display mfr
statistics information about the MFR bundle and bundled links.
# Display the configuration information and state information about all the MFR
bundles and bundled links.
<Sysname> display mfr
Bundle interface:MFR0, Bundle State = up, Bundle Class = A
fragment disabled
Bundle name = MFR0
Bundle links:
Serial1/0, PHY state = up, link state = up, Link name = Serial1/0
Table 120 Description of the fields of the display mfr command
Field
Bundle interface
Bundle state
Bundle class
fragment disabled
0 bytes/sec 0 packets/sec
0 bytes/sec 0 packets/sec
Description
Bundled interface
State of the bundled interface
If the bundle class is A, the state of the bundled interface is
up only if one of the bundled links is up; when all the
bundled links are down, the state of the bundled interface
is shown as down.
Whether fragmentation is enabled (in this example,
fragmentation is disabled)
663
0/50/0
0/75/0