Ip Accounting; Display Ip Count - H3C MSR 20-20 Command Reference Manual

58

display ip count

Syntax
View
Parameter
Description
Example
IP A
CCOUNTING
C
OMMANDS
display ip count { inbound-packets | outbound-packets } { exterior |
firewall-denied | interior }
Any view
inbound-packets: Displays information about incoming IP packets.
outbound-packets: Displays information about outgoing IP packets.
exterior: Displays information about the IP packets in the exterior table. The
exterior table records rule-incompliant packets.
firewall-denied: Displays information about denied IP packets.
interior: Displays information about the IP packets in the interior table. The
interior table records rule-compliant packets.
n
If no firewall is configured on the interface, packets refer to all incoming and
outgoing IP packets. If a firewall is configured, only those valid packets can pass
the firewall.
Use the
display ip count
about IP packets.
# Display information about valid rule-incompliant incoming IP packets.
<Sysname> display ip count inbound-packets exterior
6 Inbound streams information in exterior list:
SrcIP
0.0.0.0
10.153.72.181
10.153.72.137
10.153.72.141
10.153.72.141
10.153.72.141
Table 152 Description on the fields of the display ip count command
Field
SrcIP
DstIP
C
ONFIGURATION
command to display the statistics of the IP accounting
DstIP
255.255.255.255
10.153.73.255
239.255.255.250
224.0.0.2
224.0.0.9
224.0.0.9
Description
Source IP address of a packet
Destination IP address of a packet
Protocol Pkts
UDP 28
UDP 174
UDP 4
IGMP 4
UDP 4
IGMP 4
Bytes
9502
38034
644
128
208
128