Dhcp Select Server Global-Pool; Dhcp Server Detect - H3C MSR 20-20 Command Reference Manual

dhcp select server global-pool

Syntax
View
Parameter
Description
Example

dhcp server detect

Syntax
View
Parameter
Description
Example
dhcp select server global-pool [ subaddress ]
undo dhcp select server global-pool subaddress
Interface view
subaddress: Supports subaddress allocation. That is, the DHCP server and clients
are on the same network segment, and the server allocates IP addresses from the
address pool containing the network segment of the first subaddress if several
subaddresses exist.
Use the
dhcp select server global-pool
on an interface. After the interface receives a DHCP request from the DHCP client,
the DHCP server will allocate an IP address from the address pool.
Use the
undo dhcp select server global-pool subaddress
cancel the support for subaddress allocation.
By default, the DHCP server is enabled on an interface.
# Enable the DHCP server on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] dhcp select server global-pool
dhcp server detect
undo dhcp server detect
System view
None
Use the dhcp server detect
Use the
undo dhcp server detect
By default, the function is disabled.
# Enable pseudo DHCP server detection.
<Sysname> system-view
[Sysname] dhcp server detect
command to enable the DHCP server
command to enable pseudo DHCP server detection.
command to disable the function.
707
command to