Nbns-List; Netbios-Type - H3C MSR 20-20 Command Reference Manual

nbns-list

Syntax
View
Parameter
Description
Related command:
Example

netbios-type

Syntax
View
Parameter
nbns-list ip-address&<1-8>
undo nbns-list { ip-address | all }
DHCP address pool view
ip-address&<1-8>: WINS server IP address. &<1-8> means you can specify up to
eight WINS server addresses separated by spaces.
all: Specifies all WINS server addresses to be removed.
Use the nbns-list command to specify WINS server address(es) in a DHCP address
pool.
Use the
undo nbns-list
DHCP address pool.
By default, no WINS server address is specified.
If you use the nbns-list command repeatedly, the latest configuration will
overwrite the previous one.
dhcp server ip-pool and netbios-type.
# Specify WINS server address 10.12.1.99 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] nbns-list 10.12.1.99
netbios-type { b-node | h-node | m-node | p-node }
undo netbios-type
DHCP address pool view
b-node: Broadcast node. A b-node client sends the destination name in a
broadcast message. The destination returns the name-to-IP mapping to the client
after receiving the message.
p-node: Peer-to-peer node. A p-node client sends the destination name in a
unicast message to the WINS server, and the WINS server returns the mapping to
the client.
command to remove WINS server address(es) from a
719