Arp Timer Aging; Display Arp - H3C MSR 20-20 Command Reference Manual

Related command:
Example

arp timer aging

Syntax
View
Parameter
Description
Related command:
Example

display arp

Syntax
View
Parameter
reset arp, display arp.
# Configure a static ARP entry, with the IP address being 202.38.10.2, the MAC
address being 00e0-fc01-0000, and the outbound interface being Ethernet 1/0 of
VLAN 10.
<Sysname> system-view
[Sysname] arp static 202.38.10.2 00e0-fc01-0000 10 ethernet 1/0
arp timer aging aging-time
undo arp timer aging
System view
aging-time: Aging time for dynamic ARP entries in minutes, in the range 1 to
1,440.
Use the
arp timer aging
Use the undo arp timer aging
By default, the aging time for dynamic ARP entries is 20 minutes.
display arp timer aging.
# Set aging time for dynamic ARP entries to 10 minutes.
<Sysname> system-view
[Sysname] arp timer aging 10
display arp { { all | dynamic | static } | vlan vlan-id | interface interface-type
interface-number } [ [ verbose ] [ | { begin | exclude | include } string ] | count ]
Any view
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges
from 1 to 4094.
command to set aging time for dynamic ARP entries.
command to restore the default.
691