Bootfile-Name; Dhcp Enable - H3C MSR 20-20 Command Reference Manual

706 C 51: DHCP S
HAPTER

bootfile-name

Syntax
View
Parameter
Description
Example

dhcp enable

Syntax
View
Parameter
Description
Example
C C
ERVER ONFIGURATION OMMANDS
bootfile-name bootfile-name
undo bootfile-name
DHCP address pool view
bootfile-name: Boot file name, a string of 1 to 63 characters.
Use the
bootfile-name
address pool for the client.
Use the
undo bootfile-name
from the DHCP address pool.
By default, no bootfile name is specified.
If you execute the bootfile-name command repeatedly, the latest configuration
will overwrite the previous one.
# Specify the bootfile name aaa in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name aaa
dhcp enable
undo dhcp enable
System view
None
Use the
dhcp enable
Use the
undo dhcp enable
By default, DHCP is disabled.
n
You need to enable DHCP before performing DHCP server and relay agent
configurations.
# Enable DHCP.
<Sysname> system-view
[Sysname] dhcp enable
command to specify a bootfile name in the DHCP
command to remove the specified bootfile name
command to enable DHCP.
command to disable DHCP.