Display Interface Virtual-Template - H3C MSR 20-20 Command Reference Manual

662 C 44: L
HAPTER OGICAL
Related command:
Example

display interface virtual-template

Syntax
View
Parameter
Description
Related command:
Example
I C C
NTERFACE ONFIGURATION OMMANDS
interface virtual-ethernet.
# View the state information about VE 12.
<Sysname> display interface virtual-ethernet 12
Virtual-Ethernet2 current state: UP
Line protocol current state: UP
Description: Virtual-Ethernet2 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2,
IPv6 Packet Frame Type: PKTFMT_ETHNT_2,
Output queue : (Urgent queue : Size/Length/Discards)
Output queue : (Protocol queue : Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
Table 119 Description on the fields of the display interface virtual-ethernet command
Field
current state
Line protocol current state
Description
The Maximum Transmit Unit
Internet protocol processing
IP Packet Frame Type
Hardware Address
IPv6 Packet Frame Type
Output queue : (Urgent queue :
Size/Length/Discards)
Output queue : (Protocol queue :
Size/Length/Discards)
Output queue : (FIFO queuing :
Size/Length/Discards)
display interface virtual-template [ number ]
Any view
number: VT number, which can be the number of any existing VT.
Use the display interface virtual-template
information about the existing VTs. If you do not provide a VT number, this
command will display the state information about all the existing VTs.
interface virtual-template.
# View the state information about VT 1.
<Sysname> display interface virtual-template 1
Virtual-Template1 current state: UP
Hardware Address: 000f-e200-1234
Hardware Address: 000f-e200-1234
Description
Physical state of the interface: UP/DOWN
State of the link layer protocol: UP/DOWN
Description string of the interface
MTU of the interface
Processing state of the network layer protocol:
enabled/disabled
Encapsulation format of IP packets
Hardware address (MAC addresses)
Encapsulation format of IPv6 packets
Statistics on output queues
command to view the state
0/50/0
0/500/0
0/75/0