Display Dhcp Server Ip-In-Use - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Example

display dhcp server ip-in-use

Syntax
View
Parameter
Description
Related command:
Example
Any view
None
Use the
display dhcp server forbidden-ip
excluded from dynamic allocation in DHCP address pool.
# Display IP addresses excluded from dynamic allocation in the DHCP address pool.
<Sysname> display dhcp server forbidden-ip
IP Range from 1.1.1.1
IP Range from 2.2.2.2
display dhcp server ip-in-use { all | ip ip-address | pool [ pool-name ] }
Any view
all: Displays the binding information of all DHCP address pools.
ip ip-address: Displays the binding information of a specified IP address.
pool [ pool-name ]: Displays the binding information of a specified address pool.
The pool name is a string of 1 to 35 characters. If no pool name is specified, the
binding information of all address pools is displayed.
Use the
display dhcp server ip-in-use
information of DHCP address pool(s) or an IP address.
reset dhcp server ip-in-use.
# Display the binding information of all DHCP address pools.
<Sysname> display dhcp server ip-in-use all
Global pool:
IP address Client-identifier/
Hardware address
10.1.1.1 4444-4444-4444
--- total 1 entry ---
Table 128 Description on fields of the display dhcp server ip-in-use command
Field
Global pool
IP address
Client-identifier/Hardware
address
Lease expiration
command to display IP addresses
to 1.1.1.1
to 2.2.2.5
command to display the binding
Lease expiration
NOT Used
Description
Binding information of a DHCP address pool
Bound IP address
Client's ID or MAC of the binding
Lease expiration time
713
Type
Manual