Display Dhcp Relay Server-Group; Display Dhcp Relay Statistics - H3C MSR 20-20 Command Reference Manual

Description
Example

display dhcp relay server-group

Syntax
View
Parameter
Description
Example

display dhcp relay statistics

Syntax
View
Parameter
Use the
display dhcp relay security tracker
for refreshing dynamic bindings on the relay agent.
# Display the interval for refreshing dynamic bindings on the relay agent.
[Sysname] display dhcp relay security tracker
Current tracker interval : Auto
The interval is 10 seconds.
display dhcp relay server-group { group-id | all }
Any view
group-id: Displays the information of the specified DHCP server group numbered
from 0 to 19.
all: Displays the information of all DHCP server groups.
Use the
display dhcp relay server-group
configuration information of a specified or all DHCP server groups.
# Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1
No.
1
2
Table 134 Description on fields of the display dhcp relay server-group command
Field
No.
Group IP
display dhcp relay statistics [ server-group { group-id | all } ]
Any view
group-id: Specifies a server group number in the range of 0 to 19 about which to
display DHCP packet statistics.
all: Specifies all server groups about which to display DHCP packet statistics.
Information for each group will be displayed.
command to display the
Group IP
1.1.1.1
1.1.1.2
Description
Sequence number
IP address in the server group
command to display the interval
739