Display Dhcp Relay; Display Dhcp Relay Security - H3C MSR 20-20 Command Reference Manual

Example

display dhcp relay

Syntax
View
Parameter
Description
Example

display dhcp relay security

Syntax
View
Parameter
Description
Example
# Configure Ethernet 1/0 to support authorized ARP.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] dhcp update arp
display dhcp relay { all | interface interface-type interface-number }
Any view
all: Displays information of DHCP server groups that all interfaces correspond to.
interface interface-type interface-number: Displays information of the DHCP
server group that a specified interface corresponds to.
Use the
display dhcp relay
groups correlated to an interface or all interfaces.
# Display information about DHCP server groups correlated to all interfaces.
[Sysname] display dhcp relay all
Interface name
Ethernet1/1
Table 131 Description on fields of the display dhcp relay all command
Field
Interface name
Server-group
display dhcp relay security [ ip-address | dynamic | static ]
Any view
ip-address: Displays the binding information of an IP address.
dynamic: Displays information about dynamic bindings.
static: Displays information about static bindings.
Use the
display dhcp relay security
bindings of DHCP relay agents. If no parameter is specified, information about all
bindings will be displayed.
# Display information about all bindings.
command to display information about DHCP server
Server-group
2
Description
Interface name
DHCP server group number correlated to the interface.
command to display information about
737