display interface null
Syntax
View
Parameter
Description
Related command:
Example
display interface virtual-ethernet
Syntax
View
Parameter
Description
The "Hold timer" field of the display interface mp-group command represents
the hold time of the link state (up/down) of the current interface, and the "LCP
initial" field indicates that the link control protocol (LCP) is initialized. Refer to
Table 117 for the description on the other fields.
display interface null [ 0 ]
Any view
0: Null interface number. This argument is always 0.
Use the
display interface null
the null interface. Even if this argument is not specified, the state information
about null interface 0 is displayed, because there is only one interface.
interface null.
# View the state information about null 0.
<Sysname> display interface null 0
NULL0 current state :UP
Line protocol current state :UP (spoofing)
Description :
NULL0 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
Physical is NULL DEV
Last 300 seconds input:
Last 300 seconds output:
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Refer to Table 117 for the description on the fields of the display interface null
command.
display interface virtual-ethernet [ number ]
Any view
number: Virtual Ethernet (VE) interface number, which can be the number of any
existing VE interface.
Use the
display interface virtual-ethernet
information about the existing VE interfaces. If you do not provide a VE interface
number, this command will display the state information about all the existing VE
interfaces.
command to view the state information about
0 bytes/sec 0 packets/sec
0 bytes/sec 0 packets/sec
command to view the state
661