Port Isolation Configuration Commands; Display Port-Isolate Group; Port-Isolate Enable - H3C MSR 20-20 Command Reference Manual

42

display port-isolate group

Syntax
View
Parameter
Description
Example

port-isolate enable

Syntax
View
Parameter
P I
ORT SOLATION
C
OMMANDS
display port-isolate group
Any view
None
Use the
display port-isolate group
default isolation group (Group 1).
# Display information of the default isolation group.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 1
Ethernet1/1
Table 116 Description on the output information of the display port-isolate group
command
Field
Port-isolate group information
Uplink port support
Group ID
Ethernet1/1 Ethernet1/2
port-isolate enable
undo port-isolate enable
Ethernet interface view, port group view
None
C
ONFIGURATION
command to display information of the
Ethernet1/2
Description
Information of the isolation group
Whether support uplink port
Isolation group number
Ordinary ports (non-uplink ports) in the isolation
group