Network - H3C MSR 20-20 Command Reference Manual

720 C 51: DHCP S
HAPTER
Description
Related command:
Example

network

Syntax
View
Parameter
Description
C C
ERVER ONFIGURATION OMMANDS
m-node: Mixed node, a combination of a b-node first and p-node second. An
m-node client broadcasts the destination name, if there is no response, and then
unicasts the destination name to the WINS server to get the mapping.
h-node: Hybrid node, a combination of a p-node first and b-node second. An
h-node is a p-node with the peer-to-peer communication mechanism. An h-node
client unicasts the destination name to the WINS server, if there is no response,
and then broadcasts it to get the mapping from the destination.
Use the
netbios-type
DHCP address pool.
Use the
undo netbios-type
from a DHCP address pool.
No NetBIOS node type is specified by default.
dhcp server ip-pool and nbns-list.
# Specify the NetBIOS node type as b-node in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] netbios-type b-node
network ip-address [ mask-length | mask mask ]
undo network
DHCP address pool view
ip-address: IP address range for dynamic allocation. If no mask length and mask is
specified, the natural mask will be used.
mask-length: Mask length, in the range of 1 to 30.
mask mask: Specifies the IP address network mask, in dotted decimal notation.
Use the network
in a DHCP address pool.
Use the
undo network
No IP address range is specified by default.
Note that you can specify only one network segment for each DHCP global
address pool. If you use the network command repeatedly, the latest
configuration will overwrite the previous one.
command to specify the client NetBIOS node type in a
command to remove the client NetBIOS node type
command to specify the IP address range for dynamic allocation
command to remove the specified address range.