Static-Bind Client-Identifier - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Related command:
Example

static-bind client-identifier

Syntax
View
Parameter
Description
Related command:
Example
None
Use the
reset dhcp server statistics
DHCP server.
display dhcp server statistics.
# Clear the statistics of the DHCP server.
<Sysname> reset dhcp server statistics
static-bind client-identifier client-identifier
undo static-bind client-identifier
DHCP address pool view
client-identifier: The client ID of a static binding, a string with 4 to 160 characters
in the format H-H-H..., each H indicates 4 hex digits except the last H indicates 2
or 4 hex digits. For example, aabb-cccc-dd is a valid ID, while aabb-c-dddd and
aabb-cc-dddd are both invalid.
Use the
static-bind client-identifier
static binding in a DHCP address pool.
Use the
undo static-bind client-identifier
of a static binding from a DHCP address pool.
By default, no client ID is specified.
Note that:
Use the static-bind client-identifier
■
static-bind ip-address command to accomplish a static binding
configuration.
The ID of the static binding of a client must be identical to the ID displayed by
■
using the display dhcp client verbose command on the client. Otherwise,
the client cannot obtain an IP address.
If you use the static-bind client-identifier or static-bind mac-address
■
command repeatedly, the latest configuration will overwrite the previous one.
dhcp server ip-pool, static-bind ip-address, static-bind mac-address, and
display dhcp client verbose.
# Bind the client ID aaaa-bbbb to the IP address 10.1.1.1 with the mask
255.255.255.0 in DHCP address pool 0.
command to clear the statistics of the
command to specify the client ID of a
command to remove the client ID
command together with the
723