Dhcp Server Relay Information Enable; Dhcp Update Arp - H3C MSR 20-20 Command Reference Manual

710 C 51: DHCP S
HAPTER
View
Parameter
Description
Example

dhcp server relay information enable

Syntax
View
Parameter
Description
Example

dhcp update arp

Syntax
View
C C
ERVER ONFIGURATION OMMANDS
System view
milliseconds: Response timeout value for ping packets in milliseconds, in the range
of 0 to 10,000. If the ping timeout time is set to 0, the DHCP server will not
perform any ping collision detection.
Use the
dhcp server ping timeout
time of the ping packet on the DHCP server.
Use the
undo dhcp server ping timeout
The time defaults to 500.
# Specify the response timeout time as 1000ms.
<Sysname> system-view
[Sysname] dhcp server ping timeout 1000
dhcp server relay information enable
undo dhcp server relay information enable
System view.
None
Use the dhcp server relay information enable
server to handle option 82.
Use the
undo dhcp server relay information enable
the DHCP server from handling option 82.
By default, the DHCP server handles Option 82.
# Configure the DHCP server to ignore Option 82.
<Sysname> system-view
[Sysname] undo dhcp server relay information enable
dhcp update arp
undo dhcp update arp
Interface view
command to configure response timeout
command to restore the default.
command to enable the DHCP
command to disable