694
C
46: ARP C
HAPTER
display arp vpn-instance
Syntax
View
Parameter
Description
Related command:
Example
naturemask-arp enable
Syntax
View
Parameter
Description
C
ONFIGURATION
OMMANDS
display arp vpn-instance vpn-instance-name [ | { begin | exclude | include } string |
count ]
Any view
vpn-instance-name: Name of VPN instance, a case-sensitive string of 1 to 31
characters. With this argument specified, the ARP entries for a specific VPN
instance are displayed.
|: Uses a regular expression to specify the ARP entries to be displayed.
begin: Displays the ARP entries from the first one that contains the specified
string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries that contain the specified string.
string: A case-sensitive string for matching, consisting of 1 to 256 characters.
count: Displays the number of ARP entries.
Use the
display arp vpn-instance
specified VPN instance.
arp static and reset arp.
# Display ARP entries for the VPN instance named test.
<Sysname> display arp vpn-instance test
IP Address
20.1.1.1
naturemask-arp enable
undo naturemask-arp enable
System view
None
Use the
naturemask-arp enable
requests must be from the same subnet. In this case, ARP requests from a natural
network are supported.
command to display the ARP entries for a
Type: S-Static
D-Dynamic
MAC Address
VLAN ID
00e0-fc00-0001
N/A
command to cancel the restriction that ARP
Interface
N/A
Aging Type
N/A
S