Reset Arp - H3C MSR 20-20 Command Reference Manual

Example

reset arp

Syntax
View
Parameter
Description
Related command:
Example
Use the
undo naturemask-arp enable
By default, the support for ARP requests from a natural network is disabled.
# Enable the support for ARP requests from a natural network.
<Sysname> system-view
[Sysname] naturemask-arp enable
reset arp { all | dynamic | static | interface interface-type interface-number }
User view
all: Clears all ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
interface interface-type interface-number: Clears the ARP entries for the interface
specified by the argument interface-type interface-number.
Use the command to clear ARP entries except authorized ARP entries
reset arp
from the ARP mapping table.
Note that with interface interface-type interface-number specified, the command
clears only dynamic entries for the interface.
arp static and display arp.
# Clear all static ARP entries.
<Sysname> reset arp static
command to restore the default.
695